Reliable, Rugged and Accurate Transmitter
Transmitter is available in Stand Alone Configuration or System
The MCT460 Transmitter Stand-Alone design makes multiple measurements
and creates analog, digital and bus outputs directly from
the Transmitter as it operates on the processing line.
The MCT460 System design uses a proprietary cable to communicate
to an Operator Interface, located away from the processing
line. All analog, digital and bus outputs are available at
the Operator Interface.
The Near Infrared (NIR) Operating
Light from the lamp is directed through
the rotating, narrow band-pass NIR filters. The filters separate
the light into NIR wavelengths, selected specifically by PSC
for the measurement and application being performed. The NIR
light is then directed onto the product being measured, normally
on a conveyor belt or moving web.
Subsequently, the light reflected off of the product is captured
by a mirror and focused onto a Lead sulfide detector. The
detector’s microvolt output is then taken by the on-board
“smart” circuit board and converted into percent
moisture or other engineering units.